Making Toys

We will go through this process in class just make sure your breakout board is ready to go!

CODE FOR THE BUTTON (Ring the Bell)

[sourcecode language=”css”]
/*
doorbell basic BUTTON!!
by Rob Faludi faluudi.com
*/

#define VERSION "1.00a0"

int BUTTON = 2;

void setup(){
pinMode(BUTTON, INPUT);
Serial.begin(9600);
}

void loop(){
//send a capital D over the serial port if the button is pressed
if (digitalRead(BUTTON) == HIGH){
Serial.print(‘D’);
delay(10); //prevents overwhelming the serial port
}
}
[/sourcecode]

CODE FOR THE BELL (Ring my bell)
[sourcecode language=”css”]

*
doorbell basic DINGY!!
by Rob Faludi faluudi.com
*/

#define VERSION "1.00a0"

int BELL = 4;

void setup(){
pinMode(BELL, OUTPUT);
Serial.begin(9600);
}

void loop(){
//look for a capital D over the serial port and ring the bell if found
if (Serial.available() > 0){
if (Serial.read() == ‘D’) {
//ring bell briefly
digitalWrite(BELL, HIGH);
delay(10);
digitalWrite(BELL, LOW);
}
}
}

[/sourcecode]

CODE TO CONFIRM FEEDBACK (BELLS)
[sourcecode language=”css”]

/*
doorbell feedback dingy!!
by Rob Faludi faluudi.com
*/

#define VERSION "1.00a0"

int BELL = 4;

void setup(){
pinMode(BELL, OUTPUT);
Serial.begin(9600);
}

void loop(){
//look for a capital D over the serial port and ring the bell if found
if (Serial.available() > 0){
if (Serial.read() == ‘D’) {
//send feedback that the message was received
Serial.print(‘K’);
//ring bell briefly
digitalWrite(BELL, HIGH);
delay(10);
digitalWrite(BELL, LOW);
}
}
}
[/sourcecode]

CODE TO CONFIRM FEEDBACK (BUTTONS)

[sourcecode language=”css”]

/*
doorbell feedback BUTTON!!
by Rob Faludi faluudi.com
*/

#define VERSION "1.00a0"

int BUTTON = 2;
int LED = 11;

void setup(){
pinMode (BUTTON, INPUT);
pinMode (LED, OUTPUT);
Serial.begin(9600);
}

void loop(){
//send a capital D over the serial port if the button is pressed
if (digitalRead(BUTTON) == HIGH){
Serial.print(‘D’);
delay(10); //prevents overwhelming the serial port
}

// if a capital K is received back, light the feedback LED
if (Serial.available() > 0){
if (Serial.read() == ‘K’){
digitalWrite(LED, HIGH);
}
}

// when the button is released, turn off the
if ( digitalRead(BUTTON) == LOW){
digitalWrite(LED, LOW);
}

}
[/sourcecode]